buck stove 21 installation manual

Safety notice, iF this manual heater IS NOT properly manual installed, A house installation fire buck MAY result.
Release installation knob and it will pop back.A flex buck pipe connector is installation suggested for easy connection.Provisions for adequate combustion and ventilation air must be provided.Ventilation Air" on pages 6-10 of this manual.It uses air (oxygen) from the room in which it is installed.Example: If you want to installation control the operation of this unit with the Remote Control then you must turn the Wall Switch "OFF". See the appropriate section of this manual for instructions.
Connect these items directly to part the outdoors or spaces open to island the outdoors.
What TO DO IF YOU smell GAS * Do not try to light any appliance * Do not touch any electrical switch; do not use any phone in your building * Immediately call your gas supplier from a neighbor's phone.Turn switch (D) to "OFF" Unplug all electric power if service is to be performed.Never install the fireplace * in a recreational vehicle * where curtains, furniture, clothing, or other island flammable objects are less than 36 inches from the front, top, or side of the fireplace * in high traffic areas * in windy or drafty areas.Place the cross logs on the locator studs in the log as shown.Unusually Tight Construction mythology The air that leaks around mythology doors and windows may provide enough fresh air for combustion and ventilation.AIR FOR full combustion AND ventilation warning This heater shall not be installed in a confined space or unusually tight construction unless crack provisions are provided for adequate combustion and ventilation air.If you can, provide greater clearances from floor, ceiling, and adjoining wall.